ARCH 101 BASIC DESIGN -EXERCISE 8  (PRE-JURY 2)
   

In thıs design  in order not to make the same mistake with the previous one , ı  tried to make a  one single group consists void in itself .  This group has a central  body  that  is like a road on which void flows .This bod is derived from 16x16 square by substractıng l shape rectangle and 2 squares ( other all  elements i used in this project are these substracted elements. )  I  made a variatıon in this group, first groups elements parallel to  central element are made of balsa , and the second group  in particular elements   i used mesh instead of cardboard . My design rule is  such that : First i  connected 2 balsa group and one mesh group to each other .Then, i got a unit. İ made e second unit identical to first one . Finally i connected them together by rotating one of them 90 degree.  The critics about this projects are like that :

1- firstly, the central body element i used is to spesific and edged   to use in a design . ( i later make my group with less edged  elements. 

2- İın order to got good flowing opportunıties for voids i left many open voids in groups. This lead to loosely defined voids which are incomplete  and make the design incomplete also .)

However, this time my project was good in terms of three dimensity and compexity.